One way to punch in to the uAttend system is on a time clock.


If your employees use a time clock with an RFID card sensor, the administrator must first assign a badge number to each employee using the steps in Setting Up Users for Badge Punching.


To punch in/out using an RFID card, the employee will swipe their card in front of the card sensor and wait for the time clock to read the card. The audio on the time clock will either beep or say "Thank you," indicating that the card has been    successfully read.

If your employees use a PIN to punch in to a time clock, the administrator must first assign a PIN to each employee. See Setting Up Users for PIN Punching.

To punch in/out using a PIN, the employee will enter their 4-digit PIN on the time clock's keypad and press OK.